Unsaturated Polyester Resin - 6122TAN

•DESCRIPTION :

This resin contains thixotropy and accelerator.
It is designed for spraying-gun process in the manufacture
of general FRP products.

• • PROPERTIES OF LIQUID RESIN :
  

  Viscosity, 25°C, Poises	...............................	4~6
  Specific Gravity	...............................	1.11~1.13
  Gel Time, Minutes, 25°C	...............................	8~15
  Thixotropy Index, 25°C	...............................	1.5~2.5

  
  

• • CURING CONDITION :
  

  Red Accelerator,Co-oct(Co6%)	.....................	0.5%
  Hardener, MEKPO (PO contents, 55%)	.....................	1.0%

  
  
  
• • PROPERTIES OF CURED RESIN:
  

  	Contents 30% of fiberglass mat	Unfilled Casting
  	(No. 450 3-plies)
  Flexural Strength, kg/mm2	20.4	N/A
  Flexural Modulus, kg/mm2	880	N/A
  Tensile Strength, kg/mm2	12.4	N/A
  Hardness, Barcol 934-1	N/A	42

* The specimens cured at room temperature + two-hour postcure at 80°C

* The data are intended as a general guide only and do not necessaily represent results that may be obtained elsewhere.