Unsaturated Polyester Resin - 6021H

• DESCRIPTION :

This is a non-accelerator and non-wax type resin.
It has the water clear transparency and good
compatibility with pigments and fillers.
This resin is specially designed for the manufacturing of buttons.。

• • PROPERTIES OF LIQUID RESIN :
  

  Viscosity, 25°C, Poises	...............................	10~12
  Specific Gravity, 25°C	...............................	1.11~1.13
  Gel Time, Minutes,25°C	...............................	2~4.5

   

• • CURING CONDITION :
  

  Transparent Accelerator, Co-oct(Co 6%)	.....................	0.5%
  Hardener, MEKPO (PO contents, 55%)	.....................	1.0%

• • PROPERTIES OF CURED RESIN:
  

  	Unfilled Casting
  Flexural Strength, kg/mm2	...................................	8.1
  Flexural Modulus, kg/mm2	...................................	382
  Tensile Strength, kg/mm2	...................................	5.5
  Elongation at Break, %	...................................	1.8
  Hardness, Barcol 934-1	...................................	35

* The specimens cured at room temperature + two-hour postcure at 80°C

* The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere.