Unsaturated Polyester Resin - 6120TA

• DESCRIPTION :

This resin is a thixotropy, non-wax type resin.
It contains accelerator. It is similar to 6120TWA,
6220TA is also designed for hand lay-up operations
to make general FRP products

• • PROPERTIES OF LIQUID RESIN :
  

  Viscosity, 25°C, Poises	...............................	4~6
  Specific Gravity, 25°C	...............................	1.11~1.13
  Gel Time, Minutes, 25°C	...............................	8~18
  Thixotropy Index, 25°C	...............................	1.5~2.5

• • CURING CONDITION :
  

  Red Accelerator, Co-oct (Co 6%)	.....................	0.5%
  Hardener, MEKPO (PO contents, 55%)	.....................	1.0%

• • PROPERTIES OF CURED RESIN:
  

  	Contents 30% of fiberglass mat	Unfilled Casting
  	(No. 450 3-plies)
  Flexural Strength, kg/mm2	21	N/A
  Flexural Modulus, kg/mm2	874	N/A
  Tensile Strength, kg/mm2	12.6	N/A
  Hardness, Barcol 934-1	N/A	47

* The specimens cured at room temperature + two-hour postcure at 80°C　

* The data are intended as a general guide only and do not necessaily represent results that may be obtained elsewhere.